everthing you need to know about samsung galaxy tablet n8010 charging

Samsung galaxy tablet n8010 has a built-in battery. Before using the device for the first time or when the battery has been unused for anextended period, you must charge the battery.Use only Samsung-approved chargers. Unauthorised chargers can cause batteries to explode or damage yourdevice.Charge the battery only with a charger. You cannot
●charge the samsung galaxy tablet n8010 battery with the USB cable.When your battery is low, the device will emit a warning tone and display a low battery message. The battery icon will also be empty. If the battery level becomes too low, the device will automatically poweroff. Recharge your battery to continue using yourdevice.If the battery is completely discharged, you cannotturn on the device, even with the USB power adapter connected. Allow a depleted battery to charge for afew minutes before you try to turn on the device.Connect the USB cable to the USB power adapter, and then
1. plug the end of the USB cable into the multifunction jack.The shape of the USB power adapter may differdepending on your region.Connecting the USB cable improperly may causeserious damage to the device or USB power adapter.Any damage caused by misuse is not covered by thewarranty.

SAMSUNG Galaxy Tab N8010 3.7V 7000mAh laptop battery

2.Plug the USB power adapter into a power outlet.
●You can use the device while it is charging, but it may take longer to fully charge the battery.
●While the device is charging, the touch screen maynot function due to an unstable power supply. If this happens, unplug the USB power adapter fromthe power outlet or unplug the USB cable from thedevice.
●While charging, the device may heat up. This is normal and should not affect your device’s lifespan or performance.
●If your device is not charging properly, bring your device and the charger to a Samsung Service Centre.

3.When the battery is fully charged, first unplug the USB power adapter and USB cable from the device, and thenfrom the power outlet.

 To save energy, unplug the USB power adapter whennot in use. The USB power adapter does not have apower switch, so you must unplug the USB poweradapter from the electrical socket when not in use toavoid wasting power. The device should remain close to the electrical socket while charging.