Do you know how to recover your Asus A550C system？

ASUS A550C 14.4V 3070mAh laptop battery

Under Advanced options, you can use System Image Recovery to recover your system using your Asus A550C's original image file.To access this during POST:

Restart your Asus A550C then press F9 during POST
Wait for Windows® to load the Choose an optionscreen then tap Troubleshoot.
Tap Advanced options
In the Advanced options screen, select System Image Recovery.
Choose an account you would like to recover usinga system image file.
Type your account password then tap Continue.
Select Use the latest available system image(recommended), then tap Next. You can also choose Select a system image if your system image is in an external device or DVD.
Follow the succeeding steps to complete thesystem image recovery procedure.
NOTE: We strongly recommend that you regularly backup your system to prevent data loss in case your Asus A550C stops working.

Important charging notification for Asus X550CA

ASUS X550CA 14.4V 3070mAh laptop battery

Ensure that your Asus X550CA is connected to a grounded power adapter before turning it on for the first time.

When using your Asus X550CA on power adapter mode, the socket outlet must be near to the unit and easily accessible.

Locate the input/output rating label on your Asus X550CA and ensure that it matches the input/output rating information on your power adapter.

Some ASUS models may have multiple rating output currents based on the available SKU.
Power adapter information:
-Input voltage: 100- 0 Vac
-Input frequency: 0- 0 Hz
-Rating output current: 3. A ( W), . A ( 0W)
-Rating output voltage: 1 V

Replacing the Hard Disk Drive for Asus R510C

ASUS R510C Series 15V 2950mAh laptop battery

Refer to the following steps if you need to replace the HDD (hard disk drive) of your Asus R510C. 

IMPORTANT! Purchase an HDD from authorized retailers of this Asus R510C to ensure maximum compatibility and reliability. It is recommended that you replace the HDD under professional supervision. You may also visit an authorized service center for further assistance.

WARNING! Disconnect all the connected peripherals, any telephone or telecommunication lines and power connector (such as external power supply, battery pack, etc.) before removing the compartment cover.

NOTE: The appearance of your Asus R510C's bottom side and HDD may vary per model but the HDD installation remains the same.

downloading a HP ENVY 15 BIOS update notice

To reduce the risk of damage to the HP ENVY 15 or an unsuccessful installation, download
and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions:
Do not disconnect power from the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Sleep.
Do not insert, remove, connect, or disconnect any device, cable, or cord.

1. From the Start screen, type support, and then select the HP Support Assistant app.
2. Click Updates and tune-ups, and then click Check for HP updates now.
3. Follow the on-screen instructions.
4. At the download area, follow these steps:
a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your computer. If the update is more recent than your BIOS, make a note of the date, name,or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive.
b. Follow the on-screen instructions to download your selection to the hard drive.
If the update is more recent than your BIOS, make a note of the path to the location on your hard drive where the BIOS update is downloaded. You will need to access this path when you are ready to install the update. 

If you connect your HP ENVY 15 to a network, consult the network administrator before

installing any software updates, especially system BIOS updates. BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the
download is complete. If no instructions are revealed, follow these steps:
1. From the Start screen, type e, and then select File Explorer.
2. Click your hard drive designation. The hard drive designation is typically Local Disk (C:).
3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains
the update.
4. Double-click the file that has an .exe extension (for example, filename.exe).
The BIOS installation begins.
5. Complete the installation by following the on-screen instructions.
NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive.

Everything you need to know about HP Envy 15 BIOS system

HP Envy 15 14.8V or 15V 2800mAh laptop battery

Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility(BIOS) includes settings for the types of devices installed, the startup sequence of the computer, and the amount of system and extended memory.

Starting Setup Utility (BIOS)
To start Setup Utility (BIOS), turn on or restart the computer, quickly press esc, and then press f10. Information about how to navigate in Setup Utility (BIOS) is located at the bottom of the screen.
NOTE: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the computer from operating properly.

Updating the BIOS
Updated versions of the BIOS may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs.
Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file.

Determining the BIOS version
To determine whether available BIOS updates contain later BIOS versions than those currently installed on the computer, you need to know the version of the system BIOS currently installed.BIOS version information (also known as ROM date and System BIOS) can be revealed by pressing fn+esc (if you are already in Windows) or by using Setup Utility (BIOS).
1. Start Setup Utility (BIOS).
2. Use the arrow keys to select Main.
3. To exit Setup Utility (BIOS) without saving your changes, use the arrow keys to select Exit, select Exit Discarding Changes, and then press enter.

To be continued.

After Working Inside Your DELL Vostro V131,you should...

DELL Vostro V131 Series 11.1V 5900mAh laptop battery

After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer DELL Vostro V131.

CAUTION: To avoid damage to the DELL Vostro V131, use only the dell battery designed for this particular Dell computer. Do not use batteries designed for other Dell computers.
1. Connect any external devices, such as a port replicator, battery slice, ormedia base, and replace any cards, such as an ExpressCard.
2. Connect any telephone or network cables to your computer.
CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the computer.
3. Replace the laptop battery.
4. Connect your computer and all attached devices to their electrical outlets.
5. Turn on your computer.

DELL XPS 15 9530 performance review

Original DELL XPS 15 9530 11.1V 5500mAh laptop battery 

Inside DELL XPS 15 9530 notebook was a 2.3-GHz Intel Core i7-4712HQ processor, 16GB of RAM and a 512GB solid-state drive. You will have no trouble playing videos, running scans and browsing the Web simultaneously on this machine, but in our performance tests, it fell a bit short of the competition.

On Geekbench 3, which measures overall performance, the XPS 15's score of 11,816 was about 2,500 points higher than the category average of 9,308. However, the MacBook Pro and the Acer V15 Nitro, both of which also have Core i7 processors, notched even higher scores of 13,352 and 12,843, respectively.

The XPS 15's 512GB SSD was fast, duplicating 5GB of multimedia files in 33 seconds -- more than a minute faster than average. Again, though, the Dell was trumped by the MacBook Pro's PCIe-based flash storage (18 seconds), as well as the Acer's more conventional 256GB SSD and 1TB HDD combo (25 seconds).

Similarly, the XPS 15 matched 20,000 names and addresses in OpenOffice in 4 minutes and 9 seconds, which is also more than a minute faster than the average but slower than its closest competitors. The Acer was a few seconds faster (3:55), while the Mac was a minute faster (3:04).

Source from www.laptopmag.com

A Brief Introduction to TOSHIBA PC Health Monitor

 TOSHIBA Satellite S50-A 14.4V 2838mAh laptop battery

The TOSHIBA PC Health Monitor application proactively monitors anumber of system functions such as power consumption, battery health and the system cooling, informing you of significant system conditions. This application recognizes the system and individual component serialnumbers, and will track specific activities related to the computer and theirusage.

The collected information includes device operation time and number ofactuations or status changes (i.e.: number of power button and FN key combination uses, AC adapter, battery, LCD, fan, HDD/SSD, sound volume, wireless communication functionalities and USB information), dateof initial system use, and also computer and device usage (i.e.: power settings, battery temperature and recharging, CPU, memory, backlight illumination time, and temperatures for various devices). The stored data uses a very small portion of the total hard disk capacity, approximately10MB or less per year.

This information is used to identify and provide a notification of system conditions which may effect the performance of your TOSHIBA computer. It may also be used to help diagnose problems should the computer require service by TOSHIBA or TOSHIBA's authorized service providers.Additionally, TOSHIBA may also use this information for quality assurance analysis.

Subject to the use restrictions above, the HDD data logged may betransferred to entities located outside of your country or region of residence(e.g., European Union). Those countries may or may not have the samedata protection laws or data protection levels as required by your homecountry or region.

Once enabled, you may disable the TOSHIBA PC Health Monitor at anytime by uninstalling the software via Uninstall a program in the Control Panel. Doing so will automatically delete all collected information from theHDD/SSD.

Battery problems troubleshooting for Motion J3500

 MOTION J3500 14.8V 2000mAh laptop battery

If your Motion J3500 battery does not last very long (less than three hours), then you need to understand following parts.

• Hot or cold conditions can adversely affect the battery charge. Use AC power if you are operating the tablet in these conditions.

• Accessory devices such as a DVD player and applications that make heavy use of the hard drive can drain the battery more quickly. Remove the accessory devices or use AC power if possible.

• Condition the Motion battery once a month by using the tablet on battery power and allowing the battery charge to drop below 20 percent before connecting the battery to AC power.

• The battery may be weakening. Use a different battery if possible.I lost data while swapping batteries

You can swap laptop battery only if:

– The tablet PC is running on AC power while you swap the battery.

– You have a second battery to place in the second battery bay before removing the battery in the first battery bay.

CLEVO W251ELQ Maintenance Precautions

Brand new CLEVO W240BAT-6 11.1V 4400mAh laptop battery

1. Don't drop it. Perform your repairs and/or upgrades on a stable surface. If the computer falls, the case and other components could be damaged.
2. Don't overheat it. Note the proximity of any heating elements. Keep the computer out of direct sunlight.
3. Avoid interference. Note the proximity of any high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage components and/or data. You should also monitor the position of magnetized tools (i.e. screwdrivers).
4. Keep it dry. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged.
5. Be careful with power. Avoid accidental shocks, discharges or explosions. •Before removing or servicing any part from the computer, turn the computer off and detach any power supplies.
•When you want to unplug the power cord or any cable/wire, be sure to disconnect it by the plug head. Do not pull on the wire.Find More Laptop AC Adapters Here.
6. Peripherals – Turn off and detach any peripherals.
7. Beware of static discharge. ICs, such as the CPU and main support chips, are vulnerable to static electricity. Before handling any part in the computer, discharge any static electricity inside the computer. When handling a printed circuit board, do not use gloves or other materials which allow static electricity buildup. We suggest that you use an anti-static wrist strap instead.
8. Beware of corrosion. As you perform your job, avoid touching any connector leads. Even the cleanest hands produce oils which can attract corrosive elements.
9. Keep your work environment clean. Tobacco smoke, dust or other air-born particulate matter is often attracted to charged surfaces, reducing performance.
10. Keep track of the components. When removing or replacing any part, be careful not to leave small parts, such as screws, loose inside the computer.

Fine more about Clevo Battery at www.storebattery.co.nz

charging notification for TOSHIBA Satellite P50t

Brand new TOSHIBA Satellite P50t 14.4V 2838mAh laptop battery

If the computer is leaking or its case is cracked, put onprotective gloves to handle it.
For models with an accessible battery read the following Changing the main battery information.When your main battery has run out of power, you have two options: plug in the AC adapter or install a charged battery.
Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object. This could cause serious injury or fire, and could also damage the battery pack and computer.Never expose a battery pack to abnormal shock,vibration or pressure. The battery pack's internal protective device could fail, causing it to overheat or ignite, resulting in caustic liquid leakage, or explosion orfire, possibly resulting in death or serious injury.
To avoid losing any data, save yourfiles and then either completely shut down your computer or put it into Hibernation mode before changing the battery.